Aerial Hardware
Durable aerial hardware for fiber utility and telecom builds, including brackets, straps, J-hooks, clamps, grounding, and mounting solutions for pole line and aerial cable support.
Fiberglass Communication Standoff Bracket - 36" (MPN 4876)
Standoff Brackets are used in aerial construction to provide a set distance from the Utility Poles for mounting Suspension Clamps. Standoff Bracke...
View full detailsGiant Band 201 Stainless (100') - .044" X 1-1/4" (MPN 2409)
Banding is available in standard 100-foot lengths. Average breaking strength is 5,500 lbs. Strapping easily accessed from dispensing carton.
Ground Wire Molding (Black) - 1/2" X 8' (MPN 11400)
Used to protect cable and ground wire on utility pole. Extruded from Polyvinyl Chloride (PVC). Standard color is Black. UV (Ultra Violet) light re...
View full detailsGuy Deadend Grip Steel Class B Coated - 1/4" (Yellow) (MPN AB110040)
Provides a means for attaching Guy Wire Hooks, Anchor Rods, and Eye Nuts. Holding Strength is greater than ratings of strand accommodated. Galvani...
View full detailsGuy Deadend Grip Steel Class B Coated - 5/16" (Black) (MPN AB110060)
Provides a means for attaching Guy Wire Hooks, Anchor Rods, and Eye Nuts. Holding Strength is greater than ratings of strand accommodated. Galvani...
View full detailsHex Lag Screw w/ Permaseal Washer - 1/4" X 2" (MPN 7190)
A hex lag screw with a conically shaped steel washer bonded to a similar shaped rubber-like piece which has a slightly smaller inside and outside ...
View full detailsJ Guy Hook for 5/8" Bolt - (MPN 2575)
J Guy Hooks prevent guy strand from creeping downward in wrapped guy applications. Ultimate strength at 45° pull is 10,000 lbs. J Guy Hooks have a...
View full detailsKUL Bronze Bonding Clamp - (MPN 2125)
Used to bond 1/4" and 5/16" galvanized strand to #6 AWG copper ground wire. Clamp consists of two mating copper alloy castings and a Silicon Bronz...
View full detailsLashing Wire Coil 302SS - .038" X 1600' (MPN 2616)
Used in corrosive environments and has a higher tensile strength 18 – 20% Chromium content and minimum 8% nickel.
Lashing Wire Coil 302SS - .045" X 1200' (MPN 2615)
Used in corrosive environments and has a higher tensile strength 18 – 20% Chromium content and minimum 8% nickel.
One Bolt Guy Attachment - (MPN 8070)
Used as an economical means for fastening a guy loop to a telephone pole Ultimate strength at 45° pull is 19,000 lbs Stamped from AISI 1018 Steel ...
View full detailsRegular Square Nut - 5/8" (MPN 8206)
Used to fasten attachments to machine bolts, carriage bolts, and insulator pins. Manufactured from Grade 2 Steel. Hot dip galvanized to meet AST...
View full detailsSingle Forged Eye Nut - 5/8-11 (MPN 5050)
Used as an attachment to the threaded ends of bolts for guying and dead-ending. Forged from 1045 High Strength Steel. Rated to support a 15,000 lb...
View full detailsSquare Head Machine Bolt with Nut (Cone Point) - 5/8" X 10" (MPN 8222)
Used for fastening poleline hardware to crossarms, poles, and other structures. Has a formed "cone point" to ease attachment of nut. Allied Bolt m...
View full detailsSquare Head Machine Bolt with Nut (Cone Point) - 5/8" X 12" (MPN 8224)
Used for fastening poleline hardware to crossarms, poles, and other structures. Has a formed "cone point" to ease attachment of nut. Allied Bolt m...
View full detailsSquare Head Machine Bolt, Cone Point w/ Nut - 5/8" X 14" (MPN 8226)
Used for fastening poleline hardware to crossarms, poles, and other structures. Has a formed "cone point" to ease attachment of nut. Allied Bolt m...
View full detailsSquare Head Machine Bolt, Cone Point w/ Nut - 5/8" X 16" (MPN 8228)
Used for fastening poleline hardware to crossarms, poles, and other structures. Has a formed "cone point" to ease attachment of nut. Allied Bolt m...
View full detailsSquare Head Machine Bolt, Cone Point w/ Nut - 5/8" X 18" (MPN 8230)
Used for fastening poleline hardware to crossarms, poles, and other structures. Has a formed "cone point" to ease attachment of nut. Allied Bolt m...
View full detailsSquare Head Machine Bolt, Cone Point w/ Nut - 5/8" X 20" (MPN 8232)
Used for fastening poleline hardware to crossarms, poles, and other structures. Has a formed "cone point" to ease attachment of nut. Allied Bolt m...
View full detailsSquare Head Machine Bolt, Cone Point w/ Nut - 5/8" X 22" (MPN 8234)
Used for fastening poleline hardware to crossarms, poles, and other structures. Has a formed "cone point" to ease attachment of nut. Allied Bolt m...
View full detailsSquare Head Machine Bolt, Cone Point w/ Nut - 5/8" X 24" (MPN 8236)
Used for fastening poleline hardware to crossarms, poles, and other structures. Has a formed "cone point" to ease attachment of nut. Allied Bolt m...
View full detailsSquare Washer for 5/8" Bolt - 1/8" X 2" (MPN 11501)
Used under the head of bolts and nuts to provide a broader bearing surface and to increase the compression of a tightened nut. Stamped from AISI 1...
View full detailsSquare Washer for 5/8" Bolt - 3/16" X 2-1/4" (MPN 11500)
Used under the head of bolts and nuts to provide a broader bearing surface and to increase the compression of a tightened nut. Stamped from AISI 1...
View full detailsStraight Single Strand Eyelet - 5/8" (MPN 2050)
Used with machine bolts or eyebolts for straightaway messenger dead-ending or guying. Forged from high strength AISI 1018 Steel. Rated to suppor...
View full details