Aerial Hardware

Used for securing Cable Guards to utility poles. Mounting Holes are 9/32". Stock size is .125" x 3/4". Stamped from AISI 1018 Steel. Size is sta...

Used in conjunction with straps to protect cable and wire running vertically down poles. Inside width of Guard is 2-3/16". Formed from AISI 1018 p...

Used for securing up to 3 guy wires at a utility pole. Anchors are installed by simply turning anchor into ground. No Wrench Anchors may be driven...

Used for securing up to 3 guy wires at a utility pole. Anchors are installed by simply turning anchor into ground. No Wrench Anchors may be driven...

Used to form guy loops that attach to anchor rods. Parallel grooves accept strand without marring. Plate halves align evenly for ease of installat...

Used to join or repair Guy Strands. Holding Strength is greater than ratings of strand accommodated. Galvanized to meet ASTM Specification A475 Cl...

Used with machine bolts or eyebolts for straightaway messenger dead-ending or guying. Forged from high strength AISI 1018 Steel. Rated to suppor...

Used to attach strand to straight line poles. Accepts 1/4" (6.6M) to 7/16" (16M) strand. Consists of one hot rolled specialty shaped plate, one st...

Used under the head of bolts and nuts to provide a broader bearing surface and to increase the compression of a tightened nut. Stamped from AISI 1...

Used under the head of bolts and nuts to provide a broader bearing surface and to increase the compression of a tightened nut. Stamped from AISI 1...

Used for fastening poleline hardware to crossarms, poles, and other structures. Has a formed "cone point" to ease attachment of nut. Allied Bolt m...

Used for fastening poleline hardware to crossarms, poles, and other structures. Has a formed "cone point" to ease attachment of nut. Allied Bolt m...

Used to fasten attachments to machine bolts, carriage bolts, and insulator pins. Manufactured from Grade 2 Steel. Hot dip galvanized to meet AST...

Polyethylene "U" Cable Guards offer a strong light-weight, easy installed means of cable protection. Angled flanges with slotted mounting holes al...

Used in corrosive environments and has a higher tensile strength 18 – 20% Chromium content and minimum 8% nickel.

Used in corrosive environments and has a higher tensile strength 18 – 20% Chromium content and minimum 8% nickel.

J Guy Hooks prevent guy strand from creeping downward in wrapped guy applications. Ultimate strength at 45° pull is 10,000 lbs. J Guy Hooks have a...

A hex lag screw with a conically shaped steel washer bonded to a similar shaped rubber-like piece which has a slightly smaller inside and outside ...

Provides a means for attaching Guy Wire Hooks, Anchor Rods, and Eye Nuts. Holding Strength is greater than ratings of strand accommodated. Galvani...

Provides a means for attaching Guy Wire Hooks, Anchor Rods, and Eye Nuts. Holding Strength is greater than ratings of strand accommodated. Galvani...

Used to protect cable and ground wire on utility pole. Extruded from Polyvinyl Chloride (PVC). Standard color is Black. UV (Ultra Violet) light re...

Banding is available in standard 100-foot lengths. Average breaking strength is 5,500 lbs. Strapping easily accessed from dispensing carton.

False Deadending is used in aerial construction when: Slack span construction is used. The lead changes from short span to long span construction...

Used to dead-end strand in guying or overhead applications. Holds up to 90% of the rated breaking strength of wire used. Bail diameter is .28" Ten...